 |
|
Frigid-Rigid
Ice Chest with Set
Backs
On most ice chests, the hinges are
mounted on the back of the lid and the back of the box. When the lid is opened,
the lid rotates back. In order for the lid to open fully, the ice chest must be
moved away from the wall or bulk head approximately three inches to allow the
lid to fully open.
In Frigid Rigid's "set back" design, however, the hinges are
mounted, not on the back of the box, but on the top of the box on a specially
designed shelf. This shelf design makes it possible for us to offer a Frigid
Rigid ice chest with the hinges moved forward either 3, 6, or 10 inches. And it
allows you to open the ice chest lid while the box is flush against a wall. This
design works especially well when the ice chest is placed in front of a center
console or under a leaning post of a boat. And it comes in handy anytime you've
filled your ice chest to the brim and need to open it!
FRIGID RIGID ICE CHEST QUALITY CONSTRUCTION
Frigid Rigid ice chests are built to withstand years of rugged outdoor
exposure. They are unaffected by sun or salt spray. The ice chests are
constructed of fiberglass with an interior and exterior of smooth,
weather-resistant marine-grade gel coat. The lid seal is made of
weather-resistant rubber. Heavy-duty 316 stainless steel hinges are attached
with stainless steel screws and backing plates which are embedded into the ice
chest, preventing rust and corrosion. Even the handles are designed to stand up
to any type of weather — they are made out of nylon rope for long-life.
Plus, Frigid Rigid ice chests offer the highest quality insulation materials to
keep contents cold. Rigid 2" polyurethane foam provides the highest
possible insulation efficiency available for ice chests. And an airtight
"D" ring lid seal made of long-life EPDM rubber keeps out hot air for
maximum cold retention. The easy-to-use flex-latch with air-valve release
assures that the lid will seal properly and stay in place.
FRIGID RIGID ICE CHEST FEATURES
All Frigid Rigid ice chests come with a built-in, recessed drain for easy
cleaning. Ice chests over 48" have two drains for easy emptying and
cleaning. They also come with four 4" diameter molded polyurethane
non-skid bottom pads that will not mark the surface of your boat's deck or any
other sensitive surface. Frigid Rigid ice chests offer several optional
accessories such as cushions for seating, corner chocks, sandwich trays, and
dividers.
ICE CHEST SIZES
| Model |
Height |
Width |
Length |
Set
Back |
Qts. |
Weight |
| FRS-1 |
15" |
15" |
21" |
3" |
32 |
23lbs. |
| FRS-2 |
15" |
15" |
24" |
3" |
38 |
26
lbs. |
| FRS-3 |
15" |
15" |
36" |
3" |
65 |
32
lbs. |
| FRS-4 |
15" |
18" |
30" |
3" |
60 |
33
lbs. |
| FRS-5 |
18" |
15" |
21" |
3" |
38 |
25
lbs. |
| FRS-6 |
18" |
18" |
24" |
3" |
63 |
29
lbs. |
| FRS-7 |
18" |
18" |
30" |
3" |
81 |
34
lbs. |
| FRS-8 |
18" |
18" |
33" |
3" |
90 |
38
lbs. |
| FRS-9 |
18" |
18" |
36" |
3" |
103 |
44
lbs. |
| FRS-10 |
18" |
21" |
30" |
6" |
105 |
40
lbs. |
| FRS-11 |
18" |
24" |
39" |
10" |
170 |
55
lbs. |
Selected cooler sizes
may be out of stock and will take 2 weeks for delivery.
Oversize
and bulky coolers shipments may require additional charges!
|
|
|