New Page 1
is the legendary high-strength repair compound designed for filling, bonding and
rebuilding wood, fiberglass, ceramic, glass, metal, masonry and many plastics.
Marine-Tex is manufactured to the highest standards to meet the harsh demands of
the marine and industrial environments, and solve many problems for home, auto
and hobby applications. Marine-Tex
is a creamy paste consistency that can be applied on vertical or horizontal
surfaces, easily fills gaps, and can be shaped to rebuild damaged components.
Marine-Tex paste provides waterproof repairs that can be used with fiberglass
tape or cloth to bridge holes and reinforce structural repairs as needed.
Emergency and permanent repairs to machinery and equipment, hulls, decks,
stripped fasteners, piping and tanks are all easily accomplished with the mighty
repair kit. Marine-Tex can be sanded or ground to shape, tapped and drilled, and
finished with most common paints and coatings.
is a heavy-duty structural epoxy, used to repair aluminum, fiberglass and wooden
boats, reinstall loose or stripped fasteners, permanently bond dissimilar metals
without galvanic corrosion, and fill gouges in wood, metal and fiberglass,
making repaired areas stronger than before.
is an excellent choice for repairing problem areas located below the waterline.
Marine-Tex is resistant to water and many chemicals.
White and Gray. Marine-Tex Gray is recommended for machinery repairs. Marine-Tex
White can be tinted with ITW Fibre-Glass Evercoat's coloring agents for
fiberglass and wood applications. Be sure to use only a small amount of coloring
agent (no more than 5% of the total volume of epoxy.)
Marine-Tex White and Gray are available in convenient kits, 2 oz., 14 oz., quart
For 2 oz. kit, 17 square inches at 1/8" thick. For 14 oz. kit, 124 square
inches at 1/8" thick. Maximum applied thickness is 1 1/2 inches.
5 parts epoxy resin to 1 part hardener — by volume. (When mixing by weight,
the ratio is 6.3 parts resin to 1 part hardener.) Always keep the epoxy at room
temperature before mixing.
OF MIXED EPOXY:
Thick, creamy no-sag putty, easily applied.
POT LIFE (WORKING TIME): At 72F, 30 minutes if mixed and spread thin across
mixing board. (A lump of material, or higher temperatures, may generate a 15 -
20 minute working time due to the heat the epoxy creates within itself.)
24 hours at a constant temperature of 72F. Lower temperatures will create longer
cure times. It is not recommended to apply the product in temperatures below 55F
Available in White & Gray!
Available in 2
Ounce and 1 Pound boxes!